Showing posts with label Bike Review. Show all posts
Showing posts with label Bike Review. Show all posts

Tuesday, December 16, 2008

Mad Kaw: Turbo ZX-10R from Japan

Sometimes, it’s a bit hard to believe the stock Kawasaki ZX-10R isn’t actually wild enough for some people. Take, for example, Isao Yoshioka san, who’s sent us this picture of his ZX-10R Ninja, which is loaded with aftermarket parts – MTC pistons, Crower rods, Muzzy clutch, T3 turbocharger, SARD wastegate and a handmade exhaust system. Also, the wheels have been changed to lightweight forged alloy Marchesini units, and the brakes are special BRR units.

Yoshioka san reckons that Kawasaki engine is making around 230 horsepower, and since he’s not satisfied with that (of course he isn’t, who would?), he plans to run more boost, add NOS, change the cams and use a longer, handmade swingarm.

Isao Yoshioka's turbocharged, 230bhp, 2004-model Kawasaki ZX-10R...

Yoshioka says he likes Faster and Faster and that he finds Japanese motorcycle websites uninteresting. He also says he wants to go to the US because he likes drag racing and custom bike shows. Ah, well, we wish you all the best, Isao! And if we ever come down to Japan, can we take that ZX-10R of yours for a spin…?

Digg this

Wednesday, December 10, 2008

New Bike MTT Turbine Streetfighter: The 420 horsepower, US$175,000 rocket-bike

Based in South Louisiana, in the US and headed by Ted McIntyre II, MTT are turbine engine specialists. According to a note on the company’s website, ‘MTT is made up of the world's most experienced professionals in the turbine engine industry, having completed more diverse, custom turbine engine installations than any other company in the world.’

The best part is, the guys at MTT seem to be putting their expertise to damn good use, by building turbine-engined two-wheeled rocketships. A few years ago, the company had made the MTT Y2K Turbine Superbike, which was powered by a Rolls Royce-Allison turbine that made 320 horsepower and 576Nm of torque. The bike’s top speed was in excess of 400km/h…

So, since a 320bhp bike that can do 400km/h simply isn’t adequate for everybody, MTT are now ready with their next bike – the Turbine Streetfighter. The MTT Streetfighter’s Rolls Royce-Allison turbine now pumps out as much as 420bhp and 680Nm of torque. Other changes over the Y2K Superbike include a bigger swingarm, Pirelli Diablo 240-section rear tyre, increased fuel capacity and an enhanced cooling system.
The MTT Turbine Streetfighter. Simply awesome...

Pics: MTT / Flickr

The MTT Turbine Streetfighter is also fitted with a full carbonfibre fairing, 17-inch carbonfibre wheels, tubular aluminium alloy frame, a rear-mounted camera with LCD color display, computerized ignition and two-speed automatic transmission. Suspension components comprise of a 55mm USD fork and oleo-pneumatic, fully adjustable monoshock from Ohlins. Brakes are Brembo units, with 320mm discs all around. The bike runs on either diesel or kerosense (!), and has a 34-litre fuel tank.

As you would expect, the Streetfighter isn’t exactly inexpensive. The turbine-engined bike sells for US$175,000 and once you’ve placed an order, you’ll need to wait for 12 weeks before you get your hands on your jet bike. Then again, you can get your bike in whatever colour you want and design your own graphics etc. if you wish…

It may not be the most practical thing in the world – a Hayabusa or a ZZR1400 is usually plenty fast for most people – but owning a jet-engined bike has got to be the stuff of dreams for bike-mad speed junkies. Imagine the look on your neighbours’ faces when you start up your MTT Turbine Streetfighter in the morning, before leaving for office. Ooooohh..., now that would be some trip…!


A Discovery channel video of the MTT Y2K jet-engined bike...

Digg this

Bike News-Memorable-Graeme Crosby and his bikes…

Now 53 years old, Graeme Crosby was one of the most versatile and accomplished motorcycle grand prix racers of his time. Born in New Zealand in 1955, Crosby went on to race around the world, winning the Daytona 200, Imola 200 and the Suzuka 8 Hours races. He also raced at the Isle of Man, winning the Senior TT in 1980.

Crosby ultimately went on to race in the 500cc class, racing with Suzuki on an RG500 in 1980 and 1981. He finished eighth in the 500cc world championship in 1980, and fifth in 1981, also winning the British TT F1 championship in the same year.



Crosby moved to Yamaha for the 1982 season, and finished second in the 500cc world championship that year, behind Franco Uncini. Crosby retired from motorcycle road racing at the end of 1982, and though he never won a race in the 500cc class, he did take 10 podium finishes between 1980-1982.


Crosby rode in the 500cc class with Suzuki, in 1980 and 81

‘No one ever told Crosby what to do. Croz liked to ride motorcycles insanely fast and he liked a drink. And sometimes, he combined the two, even on the Isle of Man,’ says Mat Oxley, who recently mentioned Graeme in a story he did on maverick motorcycle racers.


Graeme Crosby finished second in the 500cc world championship in 1982

Pics: Highsider
‘When he first hit Europe in 1979, the British TT F1 championship was all about mega-trick Honda RCB1000s with lightweight racing frames and aerodynamic bodywork,’ says Oxley. ‘So Croz rocked up at Brands on the rattiest heap of a Moriwaki Z1000 streetbike, and gave Ron Haslam the fright of his life. The fans loved Croz, and a legend was born,’ concludes Oxley.


Graeme rode this GSX-R1000 in the parade of champions, at the Isle of Man races in 2007

So what’s the fast Kiwi doing now, you might wonder? Well, he’s still riding – Crosby rode a GSX-R1000 in the parade of champions during the Isle of Man races last year. And he seems to have kept up with technology, so he even has a website. Among other things on his site, Crosby talks about some of the bikes he’s raced in the past, and here are some excerpts from what he has to say about some of those bikes:


'I loved it. It had style,' says Crosby, about the Kawasaki H1

Kawasaki H1 and H1R

If there was a bike that caused so many broken bones and gravel rash and skin grafts then this is it. Totally responsible for undertakers massive bottom line profit. What a shocker! The engine was a very wide three cylinder, two stroke unit designed by a psychotic Kamikaze teacher. This bike was a bad handler and a real beast to ride.

The engine sat too high, the chassis lacked strength. The brakes were virtually non existent, unless you fitted green linings, and even then it was at best marginal. To tame this monster required balls the size of a hot air balloon and a total disregard for ones own safety. It was hellishly fast and handled like a roller skate in a gravel pit. But I loved it. It had style, it had presence and everyone admired it. Sadly, most of these end their life with crumpled up front ends laying in wrecker’s yards.

The 500 Factory racer version of this beast was a HIR-A and it was the only bike I rode that caused me to break a bone. A collarbone! What a bastard of a bike!


You had to ride the wheels off these things to get them to perform, says Croz

Kawasaki Z1 and Z1R

The best big bike made, ever. This was an engineering feat that put Kawasaki into the big league. Lots of innovative technical refinements with this bike, DOHC, bucket valve gear etc.... a real strong engine that would go like a raped ape and had plenty of horsepower, but at the same time as strong as an oxen.

This bike formed the backbone of four stroke racing for many years. The engine was fitted to various chassis’s and performed really well. I used this base Z1 production bike to win the Castrol 6 Hour race in NZ, which I rode on my own for the full 6 hours. I even stopped for ‘pee’ during re-fuelling at one of the scheduled stops.

We then began modifying the production Z1s and ‘Superbikes’ were born. We used the standard Z1, Z1000, Z1R models and modified the engines and tuned the chassis. We did lots of work on the engine by using Pop Yoshimura’s racing parts to make good amounts of horsepower. We then tried to tame it by slightly modifying the chassis. Bracing it here and there and fitting wider wheels and soft slick tyres.

Then came the fun part – I would throw a leg over it and set off down pit lane not knowing what to expect! Well, we generally got them steering OK but looking back it was still just a modified rode bike that you had to ride the wheels off to get it to perform.


The Yamaha YZR500 OW60, the bike Crosby rode to a second place finish in the 1982 500cc motorcycle grand prix racing world championship

Yamaha OW60

I joined Yamaha with the Agostini Marlboro Team in 1982 and was faced with an extraordinary situation. Kenny Roberts had convinced Yamaha to build the 82 GP bike with unconventional steering geometry. I tested the bike in Japan and was disappointed with its performance.

We decided to make our own modifications and I used Suzuki geometry from the 81 XR35 bike, and it transformed this OW60 into a weapon. An alloy chassis and power valves made it a delight to ride. It had very similar performance to the 82 Suzuki’s but I liked its colour scheme much better!

Anyway, I rode this to a 2nd place in the 500cc World Championship. I felt though it was an intermediate bike made in 82 as a stop gap measurement while waiting for the V4 to be produced.

For more of Graeme Crosby and his bikes, visit his website here

Digg this

New Bike Ferrari motorcycle coming up for sale, asking price US$300,000

For those who’ve always wanted a Ferrari motorcycle, here’s your chance to get one. Not some crappy backyard bodge job or a vague concept – this is the real thing. It’s the one-off Ferrari motorcycle built by David Kay Engineering and bears frame and engine number SF-O1M. It’s the only real Ferrari motorcycle in the world.


Back in 1990, David Kay wrote to Piero Ferrari (Enzo Ferrari’s son), asking him if he could build a motorcycle that would carry the prancing horse badge, in tribute to the late Enzo. Piero did approve the project and gave David the permission to put a Ferrari badge on his motorcycle.

The bike, which took 3,000 man-hours to build, was completed in 1995. Its 900cc, four-cylinder, DOHC engine is custom-built, and produces 105 horsepower at 8,800rpm – enough to propel the 172-kilo bike to a top speed of 265km/h.

Other bits on this 1995 Ferrari 900 include a tubular steel chassis, aluminium bodywork, custom-built exhaust system, digital instrument panel, Forcelle Italia USD fork, Brembo disc brakes, 17-inch Astralite wheels and twin WPS shock absorbers at the back.



A real, 'official' Ferrari motorcycle, for a mere US$300,000. A bargain, eh?

Pics: Bonhams, via MC24

The bike, which has spent most of its life in its owner’s drawing room, is in perfect, mint condition. Bonhams will be auctioning the machine on the 20th of this month, and asking price would be around US$300,000. Now if all your mates are lining up to buy a Ducati Streetfighter S or the MV Agusta Brutale 1078RR, and you want to be one up on them…

More details on the Bonhams website here

Digg this